No sound

Posted05/15/2025

Updated05/15/2025

Bysales-eng

Question

I connected a monitor to the HDMI port of the NX-G30 series and played a video, but there was no sound.

Answer

The default sound setting for the NX-G30 series is “Not Used.”
You can change the setting on the BIOS screen.
1. Prepare a USB keyboard and connect it to the NX-G30.
2. After turning on the power to the NX-G30, immediately press the “DEL” key several times to go to the BIOS screen.
3. From the BIOS menu, go to Chipset -> Sounth Cluster Configuration -> HD Audio Configration.
4. Change the setting to “Enable”.
5. Press the “F4” key to save the settings and exit the BIOS.

Inquiry

technical support

Click here for email inquiries